The L18050 Roll Conversion Module: PE, PW and ASF Bypass Board, Custom Capping Motor, Forward and Reverse Buttons, Shipped by DHL

Published 4 August 2024

A minute of a converted L18050 printing a roll of white stickers onto the bench, with the module that makes it possible shown piece by piece in captions: the bypass board, the custom capping motor, the forward and reverse buttons. Music on the audio track, so the captions carry the information, and I have expanded each one below. This is the module inside every roll printer we have sold since 2024, and the one other converters buy from us.

Clip, 60 s. August 2024. · Watch on YouTube

What the video shows

  1. 0:02 — The most stable roll conversion for L18050
  2. 0:12 — Forward and reverse buttons on the printer
  3. 0:17 — Custom capping motor on its relay board
  4. 0:22 — PE / PW / ASF bypass board
  5. 0:37 — XP-600 print head sticker; external ink tank
  6. 0:47 — Ink supply: CMYK and white
  7. 0:52 — Printing a continuous roll

Three sensors, one board

PE is paper end, PW is paper width, ASF is the sheet feeder motor. The stock printer uses all three to decide whether to pull a sheet, measure it and eject it. The bypass board answers those questions for the printer permanently: paper present, correct width, no sheet feeder. The result is a roll that never ejects and never gets measured.

Spec card: L18050 roll conversion module with PE PW ASF bypass and custom capping motor
The parts behind 'most stable'.
Converted Epson L18050 printing a continuous roll of white sticker transfers onto the bench, caption the most stable roll conversion for L18050
The roll running off the converted L18050.
Open L18050 with the carriage and module area visible, caption PePwAfs bypass board
Where the PE / PW / ASF bypass board lives.

Custom capping motor

The stock capping motor is small; DTF needs stronger, more frequent cleaning. The module adds a heavier capping motor driven from its own relay board, so cleans are stronger and the head stays sealed properly between jobs. This is the part nobody else was fitting in India.

Green relay board with blue relays next to the L18050, caption custom capping motor
The relay board that drives the custom capping motor.

Forward and reverse buttons

Two buttons on the printer body move the film forward or back by hand. That is how you position the roll to cut, or back it up after a cancelled job. Reverse here is mechanical, driven by the module, which is the only safe way to reverse on an L18050; software reverse without this hardware burns the CR motor, as explained in this post.

Front panel of the converted L18050 with added Reverse and Forward buttons
Forward and reverse buttons on the printer.

Head and tank

The head carries an XP-600 sticker in the clip: the custom manifold and dampers make it serviceable like an XP600, as in the manifold replacement. Ink comes from an external tank with CMYK and white, with the Epson tank bypassed.

L18050 with an EPC XP-600 print head label and the external ink tank beside it
XP-600 label on the head; external tank beside.
External ink supply with yellow, cyan, magenta and white bottles connected to the L18050
CMYK and white supply.

In the box and where it ships

Bypass board, relay board and capping motor, buttons, cables, and the fitting video. Global shipping by DHL Air for converters; pan-India on-site installation for the complete printer. The parts are on the store as the PE/PW bypass module and IVFO; the finished printer is the L18050 DTF roll printer, and the long demo of all of it is here.

Converted L18050 with a long printed sticker roll and the module boards on the bench
The finished build with its module on the bench.

Frequently asked questions

What does the L18050 roll conversion module bypass?

PE (paper end), PW (paper width) and ASF (sheet feeder), so the roll is never measured or ejected.

Why a custom capping motor?

The stock motor is weak for DTF cleaning. The module drives a heavier motor from its own relay board.

Can I reverse the film?

Yes, with the module's hardware buttons. Never with software alone on an L18050.

Do you ship the module abroad?

Yes, by DHL Air, to converters. Complete printers are installed on site across India.

Converter or end user?

Converters: WhatsApp quantities for the module. End users: WhatsApp for the complete printer with installation.

WhatsApp +91 86555 56060

More videos: Epson L18050 / L8050 DTF conversion