L18050 Roll Conversion Kit: ASF and PE/PW Bypassed, Forward-Reverse Film Control
Published 28 June 2024
Sixty seconds, 1.6 lakh views, one message: the Epson L18050 can run roll to roll. This clip shows a converted L18050 printing a continuous roll with the auto sheet feeder and both paper sensors bypassed, a forward-reverse control to position the film, and a custom capping station with its own suction motor. Below is what each part in the kit does and what the finished printer costs.
What the video shows
- 0:01 — L18050 fully converted to roll to roll: ASF and PE/PW bypassed
- 0:11 — Forward-reverse attachment and custom capping with suction motor
- 0:20 — Adjusting the film with forward-reverse, then starting the print
- 0:33 — Print quality for sublimation and DTF
- 0:44 — What is inside the conversion kit
What "fully converted" means here
Three things stop a stock L18050 from printing a roll: the auto sheet feeder (ASF) that expects single sheets, the paper-end and paper-width sensors (PE and PW) that cannot see transparent film, and a capping station designed for occasional office use. The video shows all three replaced: the ASF is bypassed, the sensors are bypassed, and a custom capping station with a suction motor keeps the head clean during long roll runs.


Forward and reverse film control
The kit adds a forward-reverse attachment with its own motor. Before a print you nudge the film forward or back to set the start point; during a roll job it keeps the film tracking straight. The video shows the operator using it to adjust the film, then starting the print.

Custom capping with a suction motor
The stock capping station seals the head but relies on the printer's own small pump. The kit's capping station has a separate suction motor, so head cleans actually pull ink through all channels, which matters once you are printing white DTF ink or running metres of sublimation paper without a break.

Sublimation first, DTF too
The job in the video is sublimation on a roll, and the video says the same converted printer is used for DTF as well. For DTF the printer takes the usual white ink, external tank and damper set covered in our L18050 DTF conversion review; for sublimation it runs on Jap-X sublimation inks.

What is in the conversion kit
The last part of the video lays the parts out: the control board, the forward-reverse motor, the capping station parts, and every attachment needed to fit them. The kit is supplied with the printer or sold for an L18050 you already own. The two boards are also available on their own:
- PE/PW sensor bypass module for L18050
- IVFO speed-drop module (keeps full speed on long roll runs)
- Adjustable roll feeder, 8 to 24 inch (pipe not included)
Export-ready, B2B only
The video's captions say it plainly: export-ready, B2B only, global shipping by DHL. The complete converted printer for Indian buyers is here: L18050 DTF Printer, ₹92,300 + GST today, roll stand, RIP and roll software included. Converted printers carry no warranty; each one is test-printed before dispatch and shipped with training.
Frequently asked questions
What does the roll conversion kit bypass?
The auto sheet feeder (ASF) and the paper-end and paper-width sensors (PE and PW). With those bypassed the printer accepts a continuous roll of film or paper.
Why does the kit include a separate capping station?
The custom station has its own suction motor, so head cleans pull ink through every channel. That keeps the head healthy during long roll runs with white DTF ink.
What is the forward-reverse attachment for?
It moves the film forward or back under motor control, so you can set the print start and keep the roll tracking straight.
Can I fit the kit on my own L18050?
Yes. The kit ships with all attachments and a cable guide. The two boards are also sold separately on the shop.
Does the converted printer do sublimation and DTF?
Yes. The job in the video is sublimation on a roll; the same printer runs DTF with white ink and the standard DTF consumables.
Is there a warranty?
No. Converted printers and kits are sold without warranty. Every unit is tested before dispatch.
Related guides
- Switching from Sublimation to DTF — What to Budget For
- DTF Printer Buying Guide — What to Look For (and Avoid) in India
- Starting a DTF Printing Business in India — Real Cost Breakdown
Already own an L18050?
Send a photo of your printer on WhatsApp and we will tell you which kit parts you need for roll printing.
WhatsApp +91 86555 56060More videos: Epson L18050 / L8050 DTF conversion
- Epson L18050 and L8050 Converted to DTF: The Honest, Uncut Review
- Epson L18050 DTF Without Tape: PE/PW Bypass Module, Dampers, Capping and a Live Print
- Epson L18050 DTF Conversion, Step by Step: The Complete 38-Minute DIY Guide
- Our Converted L18050 DTF Printer: What We Modify, How You Maintain It, and Who Should Buy It
- Real Facts About the DTF-Modified Epson L805 and L1800: Is This Business for You?
- Epson L18050 DTF Maintenance: Manual Head Cleaning, Taping Sheets Properly, Roll Feeding and Ink Charge