AAA-Grade XP600 Print Head, Unboxed: What You Get, What AAA Means, and Which Printers It Fits
Published 17 November 2026
Thirty-eight seconds of opening a box: the XP600 label, the inner carton, the head in its tray with the protective cover on, the nozzle plate, the six channels on top, the data connector on the side. People ask what AAA grade means and whether it is the right head for their machine, so this post answers both and ends with the ten minutes that decide whether a new head lasts.
What the video shows
- 0:01 — The labelled XP600 box
- 0:07 — Inner carton
- 0:14 — The head in its tray, protective cover on
- 0:20 — Six-channel damper side
- 0:30 — Nozzle plate and data connector
What is in the box
A sealed inner carton, the head in a moulded tray, a protective cover over the nozzle plate, and the film over the data contacts. Keep the cover on until the moment the head goes into the carriage.



AAA, A, original
Original is Epson's own part through official channels, at the top price. A grade is a tested compatible head. AAA grade is the compatible head that passes a tighter test: every nozzle firing, channel pressure checked, no refurbished parts. For a working DTF, UV or sublimation shop it is the head we fit when the original's price does not make sense, and it carries the same no-warranty-after-installation rule every head does.


Which printers
XP600 heads run most single-head A3 DTF printers including the X-Arc 600, the 12-inch dual heads, many UV flatbeds and hybrids, and sublimation machines built on the same carriage. If your machine's manifold takes XP600 dampers, this is the head.

The first ten minutes
Fit it per the XP600 install post: film off the contacts, tape over the connector, sacs in order. Then a nozzle check, then alignment. If the old head only dropped nozzles on one channel, read the manifold post first; you may not have needed this box. The head: AAA grade XP600; also original and A grade.
Frequently asked questions
What does AAA grade mean for an XP600 head?
A compatible head that passes a tighter test than A grade: every nozzle firing, channel pressure checked, no refurbished parts.
Which printers use the XP600?
Most single-head A3 DTF printers, 12-inch dual heads, many UV flatbeds and hybrids, and sublimation machines on the same carriage.
Is there a warranty on the head?
No head carries a warranty after installation and testing; that applies to original, A and AAA alike.
What do I do after fitting it?
Nozzle check, then alignment in the printer software.
Need a head today?
WhatsApp the printer model; AAA ships the same day with the install video.
WhatsApp +91 86555 56060More videos: Print heads, dampers and spares
- White Not Printing After a Few Days Off? Manual Head Flush and Metal-Mesh Dampers on the L1800 / L805
- Replacing the L18050 Manifold and Dampers With XP600 Parts, and Cleaning the Head by Hand: 30 Minutes, Uncut
- Manual Head Cleaning on the Epson L18050: Pull the Ink Out First, Then Push Solution In, One Damper at a Time
- Scratches Over Your DTF Print? Clean the Head Area, Then Fix Where the Film Lands
- Both Lights Blinking Red on the Epson L1800 or L805? Reset the Waste Ink Pad Counter in Three Minutes
- Fitting a White Ink Circulation System on an L1800 Yourself: Y-Connector, Two Pipes, and How to Run It Every Morning