A 12 × 40 Inch Lanyard Roll in Six Minutes: Sublimation Roll Printer With IVFO and Vacuum

Published 18 September 2023

Sixteen seconds, no talking, one roll of red lanyards coming off a converted Epson. The caption says 12 × 40 inches in six minutes, and that is the whole point of the clip: with the IVFO module the printer keeps its speed to the end of the roll, and with the vacuum bed the film stays flat under the head. People keep asking what the setup in this clip is, so here it is.

Lanyard roll, 16 s. September 2023. · Watch on YouTube

What the video shows

  1. 0:00 — Lanyard roll coming off the printer
  2. 0:06 — Printed roll held up: 12 × 40 inches in 6 minutes
  3. 0:12 — Close-up of the lanyard print

What is running in the clip

A six-tank Epson converted for roll printing, sublimation ink, a lanyard design repeated down a 12-inch wide roll. Two parts make the six-minute figure possible. The IVFO module stops the printer from slowing down, which stock Epsons do as a long job runs. The vacuum holds the roll flat on the bed so a long print does not lift into the head.

Spec card: sublimation lanyard roll printer setup with IVFO module and vacuum
What makes six minutes possible.
Red and white sublimation lanyard roll being held up after printing on a converted Epson, caption 12x40 inch print in 6 min
Forty inches of lanyard roll, straight off the printer.

The IVFO module

Every Epson desktop printer drops speed when it is pushed through long jobs. On a roll that means the first metre prints fast and the fifth prints slowly. The IVFO speed-drop module removes that behaviour; it is the part we fit on every roll printer and ship worldwide.

Close-up of printed lanyards on a sublimation roll, repeated red badges with white text
Repeated lanyard strips, no speed drop to the end.

Software, no RIP

Sublimation does not need a white channel, so there is no RIP. The roll is driven by our roll software, licensed per PC. Today that is ZiggRoll SubliPhoto: open the JPG or PNG, set the length, print one continuous roll, with pauses, copies and gap between prints. The full SubliPhoto demo is here and the roll-feeding setup on the L8050 and L18050 is here.

Close-up of the lanyard roll surface showing sharp white lettering on red
Sharp text on the lanyard strip; sublimation on the roll.

Frequently asked questions

How fast is the lanyard roll in the clip?

12 × 40 inches in about six minutes, with the IVFO module keeping speed constant.

Do I need a RIP for sublimation lanyard rolls?

No. Sublimation has no white channel. SubliPhoto drives the roll directly from a JPG or PNG.

What does the vacuum do?

Holds the roll flat on the bed so a long print does not lift into the head.

Which printer prints lanyard rolls today?

Epson L18050 or L8050 with a roll stand and SubliPhoto. The L8050 needs no conversion for sublimation.

Related guides

Printing lanyards?

Send your printer model on WhatsApp and I will tell you whether it needs IVFO, a stand, or just SubliPhoto.

WhatsApp +91 86555 56060