A 48-Inch Roll-to-Roll Sublimation Printer Under ₹2 Lakh: Why I Say Skip 24 Inch, and Where Epson Falls Short

Published 29 March 2024

A 48-inch single-head sublimation printer, running a 32-inch roll on camera with the winder going, for under two lakh. People ask me for a 24-inch sublimation printer and I tell them to buy this instead: the price difference is small, the width is double, and unlike an Epson it will take any paper and any ink. Five minutes, including a transfer onto a tee that is mostly cotton, which is not what sublimation is for, just to show you what happens.

Demo, 5 min 18 s. March 2024. · Watch on YouTube

What the video shows

  1. 0:00 — 48-inch single head; 32-inch media loaded; up to 48
  2. 0:20 — Dryer with heat control and fans
  3. 0:45 — Hoson board; control panel; waste tank; heated plate; feed and delivery
  4. 1:24 — Printing starts; ripped file
  5. 1:55 — Skip 24 inch, go 48
  6. 2:10 — Epson restrictions: thick media, original inks; here, any media
  7. 2:35 — Auto winder; colour depth
  8. 2:56 — Transfer onto a 90 percent cotton spandex tee
  9. 3:50 — The result: fabric texture shows through
  10. 4:33 — Epson needs 65 gsm paper and Epson inks; this runs ten times cheaper

The machine

Single head, 48 inches of width, here running 32-inch media. A dryer with heat control and fans over the output, which I switched off for the sound. Hoson board, a control panel, a waste pad tank, a heated plate, a feed system at the back and a delivery system with an auto winder at the front. Capping unit is the proper industrial kind. The file was ripped before the video; printing started on the first click.

Comparison card: 48-inch roll-to-roll sublimation printer versus Epson for sublimation
Why I say skip 24 inch.
48-inch Yinstar sublimation printer printing a large Minions design on a 32-inch roll
The 48-inch printing a 32-inch roll.
Side view of the 48-inch sublimation printer with the dryer hose and ink bottles
Dryer and ink supply on the side.

Why 48 and not 24

If you are shopping for a 24-inch sublimation printer, the 48-inch costs little more and prints double the width in one pass: all-over tees, flags, soft signage. And the running cost argument is bigger than the width argument.

Printed sublimation roll winding onto the auto winder at the front of the 48-inch printer
The auto winder taking up the printed roll.

Where Epson falls short

Epson desktop and wide printers for sublimation make you use thick paper, 65 gsm or more, and Epson's own inks. This machine takes any media and any sublimation ink, and the production cost comes out around ten times lower. Epson quality is a little different, true. For a sublimation business, the restrictions cost more than the difference.

Close-up of the 48-inch printer carriage with Yinstar branding over the printed design
The single head; any media, any ink.

The cotton test

I pressed the print onto a tee that is about 90 percent cotton with 10 percent polyester spandex. Sublimation bonds to polyester, so the transfer is lighter than on poly and the fabric's lines show through. That is the texture of the fabric, not the printer. It is still a usable print, which tells you how much ink this machine puts down. The tees are the imported styles we stock at the factory.

Stack of folded t-shirts in several colours on a wooden table at the factory
The tees we stock for sublimation and DTF samples.
Hand placing the printed sublimation transfer over a dark t-shirt
Pressing onto the cotton-spandex tee.

Today

Live demos at the factory in Navi Mumbai and at Hyderabad. Our sublimation inks are here. If you want sublimation rolls on an Epson you already own, SubliPhoto does that without a RIP; and for garments that are mostly cotton, the answer is DTF, not sublimation.

Frequently asked questions

Why buy 48 inch instead of 24 inch for sublimation?

Small price difference, double the width in one pass, and the same low running cost.

Why not an Epson for sublimation?

Epson requires thick paper and its own inks. This machine takes any media and ink, at roughly a tenth of the running cost.

Does sublimation work on cotton?

Poorly. It bonds to polyester. The video shows a 90 percent cotton tee: lighter print, fabric texture visible. Use DTF for cotton.

Can I see it running?

Yes, at the factory in Navi Mumbai or at Hyderabad.

Related guides

Sublimation business?

WhatsApp your products and volume; I will tell you whether 48-inch, an Epson with SubliPhoto, or DTF is the right machine.

WhatsApp +91 86555 56060

More videos: Sublimation printing