Build Your Own Dedicated DTF Printer From an L18050 Board: The 2025 Conversion Kit, Part by Part, B2B Only

Published 17 April 2025

No need to import a printer from China: this is every part of a dedicated roll-to-roll DTF printer laid out on the bench, built around an Epson L18050 board, with the panels and rail to put it in its own body. I walked through each piece in April 2025. It ships as a small parcel by DHL with a video and a diagram, and anybody who can follow the video can assemble it. One condition, said twice in the video: B2B only, two to four sets minimum. End users buy the finished printer.

Kit walkthrough, 3 min 24 s. April 2025. · Watch on YouTube

What the video shows

  1. 0:00 — L18050 converted to DTF; UV DTF version too; no need to import
  2. 0:16 — The parts: modified capping unit, head holder
  3. 0:34 — Motor driver; forward-reverse pickup motor; roller
  4. 0:44 — Auto head-cleaning control board with timer; no circulation needed
  5. 1:03 — Cables included; you need a modified L18050 or L8050 board
  6. 1:14 — Main module; power supply; vacuum; capping liquid suction motor
  7. 1:27 — Pickup rollers; head rail; base; side panels
  8. 1:53 — Ships with a complete video and diagram
  9. 2:11 — B2B only: minimum two, three, four sets
  10. 2:40 — Output side; DTF or UV DTF with curing lights
  11. 3:10 — WhatsApp; DHL Air

What is in the parcel

A modified capping unit, or we modify yours. A head holder and the head's mounting parts. A driver board for the motor. A dedicated forward-reverse pickup motor and its roller. The auto head-cleaning control board with a timer, which is why this build needs no ink circulation and no frequent manual cleans. The main module. A power supply. A vacuum that is synchronised with the print head rather than a fan on a manual switch. A capping liquid suction motor. Pickup rollers. The rail the head rides on. A base and side panels. Every cable. What you bring is a modified Epson L18050 or L8050 mainboard, and you can modify an L8050 board yourself.

Card: contents of the 2025 L18050 roll-to-roll DTF conversion kit for building a dedicated printer
One parcel by DHL. B2B only.
Conversion kit parts laid out on a green bench: boards, motors, rails and panels, caption make your own dedicated DTF printer, low import duty
The whole kit on one bench.
Hand holding the dedicated paper feed drive motor from the kit
The forward-reverse pickup motor.
Auto head cleaning control board on the bench, caption no need to keep the PC switched on
The auto head-cleaning board with its timer.

Vacuum done properly

Most DIY builds bolt suction fans under the bed with a manual controller. Here the vacuum is synchronised with the head: it runs when the head is printing and holds the film where it matters. One caption in the video, and the difference between a flat print and a scratched one.

Vacuum assembly from the kit with the caption vacuum auto synchronised with print head, not just suction fans
Vacuum synchronised with the head.
Kit hardware spread on the bench with the caption all hardware with DIY guide, support in English
All hardware, DIY guide in English.

Assembly

The parcel comes with a complete video and a diagram. Base, side panels, rail, head, boards, motors, output tray. It is hardly a large package, and a technician who has built one printer builds the next in a day. The DTF version is shown; the UV DTF version adds curing lights at the output and gets its own video.

Partly assembled printer base and side panels from the kit on the bench
Base and side panels going together.
Assembled dedicated DTF printer body from the kit with the output side visible
The assembled body, output side.

Who can buy it

B2B only. Printer converters and shops that assemble for customers, with a minimum of two to four sets per order. If you are an end user you get the finished, tested printer with installation: the L18050 DTF roll printer. The modules inside are sold individually as the PE/PW bypass and IVFO; the finished build in action is here. Shipping by DHL Air, worldwide.

Kit parts and assembled printer body on the bench, caption only B2B
Only B2B, two to four sets minimum.

Frequently asked questions

What do I need to supply for the kit?

A modified Epson L18050 or L8050 mainboard. Everything else is in the parcel.

Does the kit need ink circulation?

No. The auto head-cleaning board with timer keeps the head clear without circulation or frequent manual cleans.

Is the vacuum just fans?

No. It is synchronised with the print head, not a manual suction fan.

Can I buy one kit as an end user?

No. B2B only, minimum two to four sets. End users buy the finished printer with installation.

DTF or UV DTF?

Both. The UV DTF version adds curing lights at the output.

Converter looking for kits?

WhatsApp your company and quantity; pricing is per set from two sets up.

WhatsApp +91 86555 56060

More videos: Epson L18050 / L8050 DTF conversion