What Else DTF Prints, Shown at Print Innovation Bangalore: Jute, Nylon, Leather, Umbrellas, Folders, and the L1800 Roll Printer Behind Them

Published 27 November 2022

The samples on the stall at Print Innovation Bangalore were the point of this one: t-shirts are no longer a big deal for DTF, so I brought a polyester flag, a nylon bag, jute totes, a leather folder, an umbrella and a gym bag, all printed on the L1800 behind me. Seven minutes on what you need to print on these, why the oven stopped being an alternative, and what the modules on the printer do.

Expo demo, 7 min 33 s. Bangalore, November 2022. · Watch on YouTube

What the video shows

  1. 0:00 — Print Innovation 2022 Bangalore: what else DTF prints
  2. 0:33 — Polyester, nylon, jute, cotton bags, bottle pouches, labels
  3. 1:12 — Leather and rexine: fantastic results; umbrella with a different hot-melt; gym bag
  4. 1:45 — Printer, oven, heat press: the oven is no longer optional
  5. 2:18 — File folders; training and support
  6. 2:18 — The L1800 with ink circulation for white
  7. 2:44 — Roll or sheet on the same printer
  8. 3:16 — Inbuilt forward-reverse module; PE module feeds sheets to the rod
  9. 4:18 — Roll without software thanks to the PE module; ZigRoll for proper roll work
  10. 4:50 — Powder, bake in the oven for even curing edge to centre
  11. 5:21 — Modules we resell: circulation, forward-reverse; Indian heat press coming
  12. 6:26 — Roll stand; printer, circulation, oven, press: that is the business

Change the hot-melt, change the substrate

Polyester flag, nylon bag, two jute totes, a cotton bag, a jute bottle pouch, woven labels, a leather folder, rexine, an umbrella, a gym bag. One printer printed all of them. The variable is the hot-melt powder: a standard TPU for cotton, a different grade for nylon and the umbrella, and the right one for leather and rexine, where the results are the best of the lot.

Card: equipment list for a DTF printing business from the 2022 Bangalore expo demo
Printer, oven, press, powder. Then anything fabric.
Expo stall table with DTF printed samples, inks and the L1800 printer, caption Print Innovation 2022 Bangalore
The stall: samples, inks, printer.
Inside collar of a white t-shirt with a printed DTF brand label
A printed neck label: labels are DTF too.

Printer, oven, press

I used to say the oven was an alternative. Sorry, but no: use the oven. DTF is proper curing, and an oven cures the edge of a sheet the same as the centre, which a press hovering over film does not. So the list is printer, oven, heat press, and we train you on every step.

Converted Epson L1800 with external ink circulation unit beside a mini oven on the stall
L1800 with circulation and the oven beside it.
L1800 printing a sheet of white sticker transfers on the stall
Sheet mode: print, powder, bake.

The L1800 on the stall

Modified with ink circulation, which is optional but worth having from day one for white density. Roll or sheet on the same printer: one print, feed a sheet; ten prints, attach the roll. A forward-reverse module is built into the printer body, buttons where the stock knobs were, not an external box; it only needs a power supply. And the PE module: sheets feed straight to the rod, so you never face a feeding problem, and because of it I could print a roll here without any software. For proper roll work, ZigRoll.

Converted L1800 with white transfers printing and the forward-reverse module on the printer body
Forward-reverse buttons built into the body.
Stall table with printed transfer sheets, ink bottles and the Print Innovation Creative Graphics sign
Transfers and inks on the Creative Graphics stall.

What a DTF business needs

A printer, circulation if you can, an oven, a heat press, a cheap roll stand. Wallets, purses, jute bags, anything that counts as fabric. We resell the modules to distributors, and an all-Indian heat press was weeks away at the time. Today's equivalents: the converted L18050, the A3 oven, the 16 × 24 press and TPU powder; the substrate guide is in what else DTF prints on.

Heat press and DTF samples on the stall table at the Bangalore expo
The press, with the samples it made.

Frequently asked questions

Can DTF print on jute, nylon and leather?

Yes. Change the hot-melt powder per substrate. Leather and rexine give some of the best results.

Is the oven optional?

No. Even curing from edge to centre is what makes a DTF print last. Use an oven.

What does the PE module do?

Feeds sheets straight to the rod so there is never a feeding problem, and allows roll printing even without roll software.

Is the forward-reverse module external?

Not on our printers. It is built into the body with buttons where the stock knobs were.

Related guides

Want a sample on your substrate?

Send the material on WhatsApp; we will tell you which hot-melt and press a sample.

WhatsApp +91 86555 56060

More videos: Starting and running a DTF business