What Else DTF Prints On: Tote Bags, Umbrellas, Leather Sleeves, Jute, Nylon, Single Colour or Full Colour
Published 3 November 2022
People hear DTF and think t-shirts. This five-minute montage was my answer in 2022: the same transfer, from the same converted L1800, pressed onto an umbrella, a leather laptop sleeve, canvas totes, jute, a PVC pouch and aprons. Music only on the upload, so the captions and the objects do the talking. If it is flat enough to press and does not melt at 150 degrees, DTF probably prints on it.
What the video shows
- 0:12 — Print on any kind of fabric: aprons, totes, a sleeve
- 0:36 — A full-colour transfer on a red tote
- 1:00 — Single colour or multicolour: on an umbrella
- 1:24 — Peeling a transfer on nylon
- 2:12 — Leather laptop sleeve
- 2:36 — Printed on Creative's DTF L1800
- 3:00 — Clear PVC pouch
- 3:24 — Support is our priority: grey leatherette folio
- 3:48 — Jute and canvas totes
- 4:36 — Creative, your printing business partner
Fabric first
Cotton totes, polyester aprons, canvas, jute: anything woven takes a DTF transfer the way a t-shirt does. The red tote and apron in the first frames are full colour with a white base, pressed at the same settings as a tee. Jute is coarse, so use a slightly longer press and expect the weave to show through the print, which customers usually like.



Umbrella and nylon
Umbrella fabric is thin nylon. It takes DTF well if you press on a flat section with a pad underneath and keep the temperature at the low end, around 140 to 150 degrees, so the fabric does not glaze. Single colour or multicolour makes no difference to the process.


Leather and leatherette
The brown laptop sleeve and the grey folio are leatherette. DTF bonds to them with a shorter press and medium pressure, and the result is flat and flexible. Real leather works the same way; test a corner first because finishes vary.


PVC and promotional goods
The clear PVC pouch with the flower print is the surprise in the montage: DTF on a non-fabric surface, pressed briefly with a sheet over it. Promotional bags, pouches and aprons are where small shops earn margins that t-shirts do not give.


Getting it done
Every item here was printed on a converted L1800; today that printer is the converted L18050. If you only need the transfers, our printing service ships them by the metre and you press. Which process suits which product is in DTF vs sublimation vs screen printing.
Frequently asked questions
What can DTF print on besides t-shirts?
Totes, aprons, canvas, jute, nylon umbrellas, leather and leatherette sleeves, PVC pouches, caps, anything flat enough to press that survives about 150 degrees.
Does DTF work on leather?
Yes, on leather and leatherette, with a shorter press and medium pressure. Test a corner for the finish.
Does DTF work on umbrellas?
Yes, on a flat panel with a pad underneath and a lower temperature so the nylon does not glaze.
Can I get transfers without a printer?
Yes. The printing service supplies transfers by the metre; you press them.
Related guides
- DTF vs Sublimation vs Screen Printing — Which is Right for You?
- DTF Printing Cost Per Meter — Real Numbers from a Print Shop
Have an odd product to print?
Send a photo on WhatsApp. If DTF works on it we will press a sample before you order.
WhatsApp +91 86555 56060More videos: DTF printing service and costs
- DTF Heat Transfer Stickers from ₹150 per Metre: What the Video Shows and What You Get
- Is Your Print Cracking After the First Wash? That's the Sticker, Not the Shirt
- The Right Way to Heat Press a DTF Transfer: Pre-Press, 150 to 160 °C for 10 to 15 Seconds, Peel, Re-Press, and the Neck Label
- The 16 × 24 Double-Bed Automatic Heat Press, 100 Percent Made in India: Die-Cast Aluminium, Replaceable Coil, Auto Mode, Emergency Stop
- Specialty Screen Printing Inks Up Close: High Density, Puff, Gel, Metallic and One-Stroke White, and Where DTF Takes Over
- The 16 × 24 Monster: An Indian Fully Automatic Heat Press With a One-Year Warranty and Even Temperature Across the Plate