DTF Explained for Hindi Viewers, in English: The Process, the Three Printer Options, and the Accessories You Actually Need

Published 10 February 2022

Most of our customers in 2022 were in the South, so my videos were in English; this one was made because people in the North kept asking for Hindi. Same questions, same answers: what DTF is, which printer, what accessories are optional and what is not, what happens if the printer sits idle, and why cheap ink costs more. Recorded at a stall with the L1800 beside me. The audio on the upload is rough, so this is written from what I said and showed.

Hindi explainer, 9 min 15 s. February 2022. · Watch on YouTube

What the video shows

  1. 0:00 — Why a Hindi video: the questions from the North
  2. 0:39 — Optional attachments: take them or leave them
  3. 1:22 — Three options: L805 (A4), L1800 (A3), 12-inch roll
  4. 1:52 — The L805 gives about 7 inches of print width
  5. 2:32 — Ink circulation was a trial; what it does
  6. 3:16 — Can DTF print on anything? Mostly fabric
  7. 3:37 — Converting a used sublimation L1800: flush everything first
  8. 4:27 — No printing process is problem-free; quality decides
  9. 5:01 — Circulation and vacuum: not needed on a small printer
  10. 6:08 — Glass top on the roll printer so the film exits flat
  11. 6:42 — Head problems: see the cleaning video; buy real cleaning solution
  12. 7:22 — Printer idle ten days? This one sat six days in transport
  13. 7:53 — ₹2,000 a litre vs ₹5,000 a litre ink: thickness and opacity

The options

Three. The L805, an A4 printer that gives you roughly seven inches of usable width: logos, chest prints. The L1800, A3, the one on the table: full-front tees. And the 12-inch class, which you can run as roll-fed. In 2022 the honest advice was the L1800 for anyone starting; today it is the converted L18050.

Card: which DTF accessories are needed and which are optional, from the 2022 Hindi video
Buy the needed list first.
Converted Epson L1800 on a stall table with a laptop, caption DTF explained in Hindi
The stall: L1800, laptop, inks, film.
Converted Epson L1800 printing a DTF sheet with ink bottles and film packs beside it
Printing on the stall during the explainer.

What is optional

Ink circulation was fitted on this printer as a trial. It keeps white moving so it does not settle. On a small printer that you use daily, I do not think it is needed. Vacuum: I can say with a guarantee that this printer does not need it; scratches are solved by a flat exit, not suction. The roll version has a glass top in front so the film slides out flat. Take the attachments if you want them; the printer works without them.

Converted L1800 with the roll stand and ink circulation unit beside it on the stall
The roll stand and the circulation unit: the optional parts.
Open L1800 with a film roll loaded and a cleaning solution bottle in front
Roll loaded; cleaning solution within reach.

Converting a used sublimation printer

Yes, you can convert an L1800 or L805 that ran sublimation, but the two white tanks are full of light cyan and light magenta and the lines carry residue. Clean the tanks, flush the whole track from tank to head, and still expect trouble if any solution is left behind. Then replace the dampers. If that sounds like a lot, it is; a new printer is the easier road.

Converted L1800 with the roll stand, printing white underbase transfers at the stall
White underbase on the roll, from a converted printer.

Maintenance and idle time

No printing process is free of problems, DTF included; what changes the odds is quality of ink, film and powder. The L1800 beside me sat in transport six or seven days before the show, I ran one head clean, and it printed. Ten days idle is not the end of the printer; months idle is. For head problems, the manual flush video; and buy real cleaning solution, because the cheap mixes being sold as solution do more harm than good.

L1800 printing a sheet of cartoon DTF transfers at the exhibition stall
Six days in a truck, one head clean, printing.

Ink: the saving that is not

Ink at ₹2,000 a litre and ink at ₹5,000 a litre look like the same bottle. They are not the same thickness or opacity. Thin white gives low opacity and dull colour, and the print is not worth selling. The whole process is about ink quality; that is the final conclusion after testing everything, and it is true for an industrial machine as much as a desktop one.

Black t-shirt covered in colourful cartoon DTF prints laid on the stall table
What good ink looks like on a black tee.

Today

Process guide in English: what is DTF printing. Inks we use: premium white and CMYKW set; solution: here. The business questions from the same year are in the startup FAQ.

Frequently asked questions

Which printer should a beginner start DTF with?

In 2022, the L1800 (A3). The L805 (A4) gives about seven inches of width. Today, the converted L18050.

Can I convert my old sublimation Epson to DTF?

Yes, after cleaning the tanks and flushing the entire ink track, then new dampers. A new printer is simpler.

Do I need ink circulation or a vacuum bed?

Not on a small printer. Circulation was a trial here; vacuum is not needed if the film exits flat.

What if the printer sits idle for ten days?

Usually one head clean. This one sat six days in transport and printed.

Is cheap DTF ink worth it?

No. Lower thickness and opacity make dull prints. Ink quality is the whole process.

Related guides

Hindi support?

WhatsApp in Hindi, English or Marathi. You will get the same answers.

WhatsApp +91 86555 56060