Yinstar 12 and 24-Inch DTF Production Printers: Generation 4 Machines With Auto Head Clean, Bump Sensing and Two-Way Circulation

Published 21 January 2024

Thirty-eight seconds of a 24-inch line and its shaker on our floor, and a list of features that, in January 2024, most DTF brands in India did not have: auto head clean, head bump sensing, automatic two-way ink circulation, auto colour calibration. That is what we mean by generation 4. If you are moving from a desktop conversion to production, this is the list to buy against.

Clip, 38 s. January 2024. · Watch on YouTube

What the video shows

  1. 0:00 — Trustworthy machines for high-speed production
  2. 0:07 — Low maintenance; stable mainboard; Epson PrecisionCore heads
  3. 0:14 — Generation 4 machines and automatic shakers
  4. 0:20 — Auto head clean, head bump sensing, two-way circulation, auto colour calibration
  5. 0:30 — Catalogue on WhatsApp

What generation 4 means

First-generation DTF lines were a printer and a tray of powder. Second added a shaker. Third added an oven in line. Generation 4 is the machine looking after itself: the head cleans on a schedule, bump sensors stop the carriage before film strikes it, white ink circulates two ways through dampers and tank automatically, and colour calibration runs from the panel. The mainboard is a stable, supported board, and the heads are Epson PrecisionCore.

Card: generation 4 DTF production printer features on the Yinstar 12 and 24 inch
Buy against this list.
Yinstar 24-inch DTF printer line with automatic shaker, caption best brand in 12/24 inch DTF industry
The 24-inch line with its shaker.
Inside the automatic powder shaker with cured transfers moving through, caption the most complete automation
Inside the shaker: the most complete automation on the line.

Why it is low maintenance

Every one of those automatic functions replaces a thing an operator used to forget. Circulation forgotten means a white clog; a bump sensor missing means a dead head. The machine that needs fewer humans to remember things is the one with low maintenance, which is what we mean when we say it compared to other brands.

Print carriage of the Yinstar 24-inch over a printed white-ink transfer, caption quality parts with lifelong support
Carriage over the film; bump sensors either side.
Open electronics panel of the Yinstar printer with wiring and boards, caption committed to provide best customer support
Behind the panel: a stable, supported mainboard.

When to buy production

At 50 or more sheets a day for a 12-inch, and well beyond that for a 24-inch; the threshold is argued in which DTF printer to buy. The machines: Yinstar 12-inch XP600 dual head and Yinstar 24-inch i3200 dual head; the detailed 12-inch review is here and the 24-inch walkthrough here. Reaching every corner of Bharat means on-site installation wherever you are.

Take-up roll of the Yinstar 24-inch DTF printer with printed film winding, caption reaching every corner of Bharat
The take-up: finished transfers on the roll.

Frequently asked questions

What is a generation 4 DTF printer?

One that cleans its head, senses head bumps, circulates white two ways and calibrates colour automatically, on a stable mainboard with Epson PrecisionCore heads.

12 inch or 24 inch?

12-inch dual XP600 for 50 to a few hundred sheets a day; 24-inch i3200 for continuous roll production.

Why do you call them low maintenance?

The automatic functions replace the things operators forget, which is where maintenance problems start.

Do you install outside metro cities?

Yes. On-site installation and training across India.

Related guides

Want the catalogue?

WhatsApp 'catalogue' and your daily volume; you get the PDF and a straight recommendation.

WhatsApp +91 86555 56060

More videos: Dedicated DTF printers (X-ARC, Yinstar)