X-Arc 600 Pro in 89 Seconds: Auto Cleaning, Anti-Collision Sensors, Capping Unit You Clean From Outside
Published 28 April 2025
Eighty-nine seconds, because that is all it needs. This is the X-Arc 600 Pro, the dedicated A3 DTF printer we started shipping in 2025 for people doing 10 to 100 t-shirts a day who do not want to become printer technicians. I filmed it on the packing floor between boxes. Every line in the clip is a feature we picked on purpose, so here is each one with a sentence of why.
What the video shows
- 0:00 — Low maintenance, auto cleaning: 10 to 100 tees a day
- 0:08 — Temperature detection, touch control, secured packing
- 0:16 — Vacuum feature; anti-collision sensors both sides of the head
- 0:24 — Head clean: open the door
- 0:33 — Sensors manage the parameters, not you
- 0:40 — Capping unit cleaned from outside
- 0:49 — Dedicated inking system; white ink circulation
- 0:58 — Always out of stock; same price from either side
Low maintenance is the whole point
Auto cleaning on a schedule, intelligent temperature detection for the bed and dryer, and a touch panel instead of hidden menus. The idea is that a shop doing 10 to 100 tees a day can run it without a technician on call. Every box leaves heavy-duty packed; we learnt that the hard way with couriers.


Sensors instead of habits
Anti-collision sensors on both sides of the print head stop it before a curled film edge can hit it. A vacuum bed keeps the film flat. Height, temperature and feed are read by sensors rather than set by someone's memory. On converted desktop printers these are the things that go wrong after a long day.

Clean it from outside
Head cleaning: open the front door and the head is in front of you. The capping unit, which is the part that actually keeps a DTF head alive, can be opened and cleaned from outside without pulling the printer apart. If you have ever cleaned a capping station on a converted Epson you know why this matters.


Dedicated inking, white circulation
Over the basic model the Pro has a dedicated ink system with bottles in a holder, and inside it circulates the white ink so pigment does not settle in the lines overnight. That is the single biggest reason white stays consistent on this machine.

Stock and price
It was out of stock when I filmed and it keeps going out of stock; WhatsApp us for the next batch. The pre-booking packages on screen at the end were the April 2025 numbers: printer only, printer with manual oven, printer with automatic shaker. The current price is on the product page: X-Arc 600 Pro with automatic shaker at ₹1,49,000 + GST. Whether you contact Creative or dtgdtf.com, it is the same company and the same price, for a single head, a converted printer, or a 16-head 24-inch or 48-inch machine. Full walkthrough: X-Arc XP600 single head, every part; review: why it is the best DTF printer in India for a small shop.

Frequently asked questions
How many t-shirts a day is the X-Arc 600 Pro for?
Ten to a hundred a day. Below that a converted L18050 is enough; above it look at a 12-inch dual head.
How do I clean the head?
Open the front door. The capping unit can also be opened and cleaned from outside.
Does it have white ink circulation?
Yes, inside the dedicated inking system. It keeps white consistent between days.
What do the anti-collision sensors do?
They stop the head before a lifted film edge can hit it, on both sides.
Is the price different from Creative and dtgdtf.com?
No. Same company, same price, for every printer size.
Is there a warranty?
One year on the mainboard. Print heads are excluded after installation and testing, like every DTF printer.
Related guides
- Best DTF Printer in India (2026) — Honest Comparison
- DTF Printer Buying Guide — What to Look For (and Avoid) in India
Next batch?
Message on WhatsApp and we will tell you the current stock date and price.
WhatsApp +91 86555 56060