Which DTF Printer Should You Buy? L18050 vs 12-Inch Dual Head, by Daily Volume

Published 11 February 2024

I recorded this at one of our expo stalls in February 2024, standing between the two printers people most often ask me to compare: the converted Epson L18050 and the 12-inch dual-head XP600 roll-to-roll. The question is never which is better. It is how many sheets you print a day. Here is the ten minutes in English, with the rule I still use to answer it.

From the expo stall, 9 min 55 s. Both printers running behind me. · Watch on YouTube

What the video shows

  1. 0:00 — Every DTF option we sell in Feb 2024: L18050 to 24-inch four-head
  2. 0:52 — Live working models at our stores; watch the latest video
  3. 1:26 — Option 1: L18050 converted for sheet printing
  4. 1:46 — Option 2: 12-inch dual XP600 head roll-to-roll; option 3: assembled Chinese printers
  5. 2:22 — The only question that matters: daily production quantity
  6. 2:55 — L18050 sheet sizes and the PE/PW module; the accessories on the table
  7. 3:51 — Under 40 to 50 sheets a day, irregular orders: L18050
  8. 4:15 — Roll-to-roll: print, powder, cure in one line; about 200 A3 per roll
  9. 5:42 — Maruti 800 vs Thar: Mumbai to Leh
  10. 6:32 — Both need an AC room; bigger printers, mandatory
  11. 6:59 — Speed and quality come with cost; start small, upgrade later
  12. 7:25 — XP600 single head vs dual head: two capping stations
  13. 8:08 — Two ink grades: production inks at ₹1,100 to ₹1,200 per kg, premium density
  14. 8:48 — DTF plus vinyl plus puff on one t-shirt

Three options on the table

  1. The Epson L18050, converted for sheet printing: 12 by 18 or 12 by 19 inch sheets, with about 1 to 1.5 inches lost in height, so a 12 by 18 sheet prints up to about 16.5. It comes with the PE/PW module; the accessories laid out on the stall table are the AcroRIP dongles, the motherboards, the IVFO module, a print head and a capping station.
  2. The 12-inch dual-head XP600 roll-to-roll: you feed the roll and it prints, powders and cures in one line. Roughly 200 A3-size prints come off as one roll.
  3. Assembled Chinese printers, which I was still testing at the time and did not want to vouch for yet.
Expo stall with the converted L18050 and the 12-inch dual-head DTF printer side by side
Both printers on the stall: L18050 on the left, dual-head roll-to-roll on the right.

The only question: how many sheets a day?

If your orders are 10 or 15, or two or three, and not regular, or you are just starting, buy the small printer. If you already know you need 40 to 50 sheets every single day, avoid desktop printers altogether and go straight to the roll-to-roll.

Comparison card: converted Epson L18050 versus 12-inch dual-head XP600 roll-to-roll DTF printer
The decision as I explained it on the stall.

The way I put it on the stall: Mumbai to Leh in a Maruti 800 or a Thar. The 800 will get there, but not without stopping, and if you push it you will be opening the engine. If you are already sitting at 50 A3 sheets a day, that is Thar territory. Still want the L18050? Fine, it is a good printer, but plan to upgrade in a few months.

12-inch dual-head XP600 DTF printer printing a roll with the powder unit on the expo stall
The dual-head roll-to-roll mid-job: print, powder and cure in one pass.

Things nobody tells you

  • Both printers should sit in an AC room. For the bigger printers it is mandatory; prints go wrong in heat.
  • Speed and quality always come with cost. If investment is the problem, start small and upgrade; that is a legitimate path, not a compromise.
  • Single head versus dual head: the L18050 has one XP600 head; the 12-inch has two, with two capping stations, one for white and one for CMYK. Two heads is where the speed comes from.
Open top of the dual-head DTF printer showing the two XP600 heads and twin capping stations
Two heads, two capping stations: white on one, CMYK on the other.

Two grades of ink

I showed two ink bottles. Production inks at ₹1,100 to ₹1,200 per kg, from us, and a premium grade with noticeably higher density. For production volume you can run the lower-density ink; for quality work use the premium. Today the Jap-X range covers both.

DTF ink bottles and consumables displayed on the expo stall counter
The two ink grades on the counter.

One shirt, three techniques

The samples at the end are DTF combined with vinyl, and one shirt with DTF, golden vinyl and puff together. We do not sell those designs; they are there to show what the same printer can produce once you know the process.

Sample t-shirts on the stall showing DTF combined with vinyl and puff prints
DTF, golden vinyl and puff on the same shirt.

Today's equivalents

The two machines in this video map to today's shop like this: L18050 DTF Printer (₹92,300 + GST, converted, no warranty, tested before dispatch) and the dedicated Yinstar 12-inch XP600 dual head (₹2,65,000 + GST, one-year mainboard warranty, head excluded after installation). Live working models are at our stores; come and watch them before you decide.

Frequently asked questions

How do I choose between the L18050 and a dual-head printer?

By daily volume. Irregular or small orders: L18050. A guaranteed 40 to 50 sheets a day: skip desktops and buy the roll-to-roll.

What sheet size does the converted L18050 print?

12 by 18 or 12 by 19 inch sheets, losing about 1 to 1.5 inches in height, so around 16.5 inches of print on a 12 by 18.

What does roll-to-roll mean?

You load a roll and the machine prints, applies hotmelt powder and cures in one line. About 200 A3 prints per roll.

Do I need air conditioning?

Yes for both, and mandatory for the bigger printers.

Which ink grade should I use?

Production inks at ₹1,100 to ₹1,200 per kg for volume; premium higher-density inks for quality work.

Can I start small and upgrade?

Yes. That is the advice in the video if investment is the constraint.

Related guides

Tell me your daily count, I'll tell you the printer

Message your average and peak orders per day on WhatsApp. Honest answer, even if it is 'start smaller'.

WhatsApp +91 86555 56060

More videos: Dedicated DTF printers (X-ARC, Yinstar)