X-Arc 600 Studio, the Top-Selling DTF Printer in India: Original Epson PrecisionCore Head, Mainboard-Linked Circulation, Holiday Mode

Published 21 December 2025

The Studio became our best-selling DTF printer within a few months of launch, so this clip is the two-minute tour people kept asking for: dusting, curing, sheet, press, tee, and then every feature in the order you would check them on the showroom floor. The one I lead with is the print head. It is a 100 percent original Epson PrecisionCore, and in India that is not the default; most suppliers do not fit an original.

Clip, 1 min 49 s. December 2025. · Watch on YouTube

What the video shows

  1. 0:00 — Dusting, curing, sheet ready, pressed on a tee
  2. 0:09 — Original Epson PrecisionCore head; Indian suppliers usually do not provide original
  3. 0:24 — Temperature and humidity indicator; rear vacuum; mainboard connected
  4. 0:33 — Anti-collision sensors on both sides
  5. 0:40 — Halftone and patchwork designs
  6. 0:50 — Industrial-grade control panel, capping unit cleaning, gear, belt, rods
  7. 1:08 — Auto white circulation wired to the mainboard; auto head cleaning with holiday mode
  8. 1:26 — Ink supply tanks
  9. 1:36 — One-year mainboard warranty; pan-India installation and training
  10. 1:44 — Also: 2 head, 4 head, 24 inch, 48 inch

Dust, cure, press

The clip opens the way a working day does: powder dusted, sheet cured, transfer pressed on a tee. Then the walk-around.

Card: features of the X-Arc 600 Studio DTF printer from the December 2025 clip
In the order you would check them.
X-Arc 600 Studio DTF printer with roll output at the showroom, caption most advanced DTF printer for startups
The Studio on the showroom floor, roll running.
Heat press pressing a DTF transfer onto a red t-shirt
Pressed on a red tee at the end of the opening.

The head

An original Epson PrecisionCore print head, not a grey-market or refurbished unit. In India most suppliers do not give you an original, which is why head life varies so much between printers that look the same. The ink lines run to it through a dedicated supply and the head sits on industrial-grade rods, belt and gear.

Print head carriage of the X-Arc 600 Studio with the caption original printhead
Original Epson PrecisionCore head.
Hand holding the Epson PrecisionCore print head box beside the printer
The head's own packaging; the point is that it exists.

Sensors and indicators

Anti-collision sensors on both sides of the carriage. A temperature and humidity indicator, because white ink behaves differently at 18 degrees and 35. Rear vacuum to hold the film. All wired to the mainboard, so the printer reacts rather than the operator.

X-Arc 600 Studio printing a halftone design on film with white underbase
Halftone output from the Studio.

Circulation and holiday mode

The feature I call the best thing in the Studio: automatic white circulation connected to the mainboard, and auto head cleaning with a holiday mode. Set it before a long weekend and the printer keeps the white moving and the nozzles clear without anyone in the shop. Capping unit cleaning is reachable from the front.

Hand on the X-Arc 600 Studio power connection and control switch at the rear
Power and control at the rear; circulation and cleaning run from the mainboard.
Dedicated ink supply tanks on the X-Arc 600 Studio with CMYK and white bottles
Ink supply tanks.

Warranty and range

One year on the mainboard, pan-India on-site installation and training, print head excluded after installation and testing as with every DTF printer. The Studio with automatic shaker is ₹1,60,000 + GST; the Pro and the 2, 4-head, 24 and 48-inch machines are in dedicated printers. The buying checklist is in must-know before buying in 2025 and the long review in the X-Arc 600 review.

X-Arc 600 Studio with the roll output and showroom pricing board behind
The Studio with the showroom board behind it.

Frequently asked questions

Does the X-Arc 600 Studio use an original Epson head?

Yes, a 100 percent original Epson PrecisionCore print head.

What is holiday mode?

Automatic white circulation and head cleaning on a schedule, run from the mainboard, so the printer stays ready over days off.

Does it have anti-collision sensors?

Yes, on both sides of the carriage, plus a rear vacuum and a temperature and humidity indicator.

What is the warranty?

One year on the mainboard; head excluded after installation and testing. Pan-India on-site installation and training.

Related guides

Want to see the Studio run?

WhatsApp for a demo at Navi Mumbai or Hyderabad, or a live video of it printing your design.

WhatsApp +91 86555 56060

More videos: Dedicated DTF printers (X-ARC, Yinstar)