DTF Plus Hot Foil Stamping on the Same Printer: Spot Glue, Transfer, Then Gold, Silver or Glitter Foil

Published 13 March 2025

Something new in March 2025: DTF and hot foil stamping from one printer. The X-Arc hybrid prints a normal DTF transfer, with the areas you want foiled printed in glue. Press the transfer on the garment, lay any ordinary foil over the glue, press, peel: gold, silver or glitter on top of a full-colour print. Thirty-five seconds in the clip; the detail is below.

Clip, 35 s. March 2025. · Watch on YouTube

What the video shows

  1. 0:00 — The result: floral DTF print with gold foil details
  2. 0:04 — Hybrid 24-inch X-Arc printing the transfer
  3. 0:07 — Normal DTF ink and film, with spot glue
  4. 0:13 — Transfer onto the garment, then place any foil
  5. 0:18 — Press, peel
  6. 0:27 — Finished: colour plus foil

How it works

The printer has the usual CMYK plus white, and the hybrid head setup adds a glue channel. The design prints as a normal DTF transfer on normal film with normal ink, and the areas you want foiled print in glue instead of ink. Nothing in the regular DTF workflow changes: powder, cure, press.

Step-by-step infographic: DTF transfer with hot foil stamping on the X-Arc hybrid printer
One printer, two finishes.
Hybrid X-Arc 24-inch DTF printer printing floral transfers on film, caption DTF with gold foil hot stamping
The hybrid 24-inch printing the transfer; glue areas print alongside the ink.

Foil

Press the transfer onto the garment first. Then lay foil over the print: gold, silver, glitter, any ordinary hot-stamping foil, nothing special. Press again, let it cool, peel. The foil sticks only where the glue was printed, so the colour print shows through everywhere else.

Heat press closing on a garment with a floral DTF transfer and foil laid on top
Foil laid over the pressed transfer, second press.
Hand peeling the foil carrier off a paisley DTF print, leaving gold in the glue areas
Peel: the foil stays only on the glue.

Who this is for

Fashion and ethnic-wear printers who were sending work out for foil. The same printer prints regular DTF the rest of the day; the foil is an extra channel, not a second machine. The machine family is the 24-inch X-Arc with 4 or 5 heads; see dedicated printers and the X-Arc hybrid UV for the other hybrid. If you only need foil on a few pieces, our printing service can run it for you.

Finished paisley print on black fabric with gold foil highlights after peeling
Colour print with gold foil highlights, from one printer.

Frequently asked questions

What is DTF foil stamping?

A DTF transfer printed with glue in chosen areas. After pressing it on the garment, foil is laid over and pressed; it sticks only to the glue.

Do I need special foil?

No. Ordinary hot-stamping foil: gold, silver, glitter, colours.

Can the same printer print regular DTF?

Yes. The glue is an extra channel on the hybrid X-Arc; normal DTF runs as usual.

Which printer does this?

The X-Arc hybrid 24-inch with 4 or 5 heads.

Related guides

Want foil on your prints?

Send the design on WhatsApp. We can print a foil sample from the service before you consider the machine.

WhatsApp +91 86555 56060