A Four-Head Yinstar at 33 m²/h, and the Software That Builds the Gang Sheet From a PNG: No RIP, No Photoshop, No Corel, No Canva, No AI

Published 12 September 2026

Thirty-six seconds, two claims. The printer: a four-head Yinstar at 720 × 1200, four pass, running at 31 to 33 square metres an hour with the job screen in frame, and the caption says it is not fast-forwarded, because that is what people assume. The software: a gang sheet creator that needs nothing but a PNG with a transparent background. No RIP, no Photoshop, no Corel, no Canva, no AI. Here are both, with the numbers read off the screen.

Clip, 36 s. September 2026. · Watch on YouTube

What the video shows

  1. 0:01 — No other brand beats this speed with 6-pass detail
  2. 0:04 — Not fast forward: it is real
  3. 0:10 — Job screen: 720 × 1200, 4 pass, 31 m²/h, 33 m/h
  4. 0:16 — The four heads
  5. 0:22 — 4 head setup with Yinstar
  6. 0:28 — No RIP, no Photoshop, no Corel, no Canvas, no AI
  7. 0:34 — It just needs a PNG with a transparent background

The speed, off the screen

The job panel reads 720 × 1200 dpi, 4 pass, a job 578 mm wide, capacity 31 to 33 m²/h and about 33 metres an hour. Four i3200 heads make that possible: two for colour, two for white, each pass laying down twice what a dual head does. The caption's point is that the video runs at real speed; what looks fast-forwarded is the machine.

Spec card: four-head Yinstar DTF printer speed and the gang sheet software
Speed on the printer, time saved in the software.
Printed white-ink transfers on film with the caption no other brand can beat this speed with 6 pass details
The output at speed.
Printer job screen showing 720 x 1200 dpi, 4 pass, 31 m2/h and 33 m/h
The job panel: 4 pass, 31 m²/h, 33 m/h.
Four i3200 print heads on the Yinstar carriage with dampers, caption 4 head setup with Yinstar
Four heads on the carriage.

The gang sheet software

The second half is the part that saves more time than the heads: a gang sheet creator that takes PNGs with transparent backgrounds, sets the sheet width, gap and margin, and lays the designs out with sizes read from the files. No RIP for the layout, no Photoshop, no Corel, no Canva, no AI. The layout goes to the RIP as one file. That software is DTF Powerhouse, with the Pro version for production; the walkthrough is here.

Gang sheet creator software on screen with PNG designs listed and trimmed, caption no RIP no Photoshop no Corel no Canvas no AI
The gang sheet creator: PNGs in, layout out.
Software screen with the caption it just needs a PNG with a transparent background
One requirement: a transparent PNG.

The printer

The four-head is the production end of the Yinstar range: 24-inch i3200 dual head as the base, four heads on request. Who should buy at this level is in the 24-inch walkthrough, and head care at this volume in the i3200 manifold post.

Frequently asked questions

How fast is a four-head DTF printer?

About 31 to 33 m²/h at 720 × 1200, 4 pass, on the Yinstar four-head in the clip; roughly 33 metres an hour of 24-inch roll.

Is the video sped up?

No. The caption says so because people assume it.

What does the gang sheet software need?

A PNG with a transparent background. Nothing else.

Does it replace the RIP?

No. It builds the layout; the RIP still rips it.

Production volume?

WhatsApp your metres per day; four heads or two is a one-line answer, and Powerhouse is a free download either way.

WhatsApp +91 86555 56060

More videos: Dedicated DTF printers (X-ARC, Yinstar)