L18050 and L8050 DTF With PE/PW Bypass: A Full Roll of Stickers, No Speed Drop, No Tape

Published 19 August 2023

Fifteen seconds, music, and a roll of sticker transfers sliding out of a converted L18050 onto the floor. The caption says what matters: finally tested, custom RIP and roll functionality, available on pre-booking, on-site installation pan India. The part people ask about is the PE/PW bypass, so this post is about that.

Clip, 15 s. August 2023. · Watch on YouTube

What the video shows

  1. 0:00 — Roll of sticker transfers coming out of the L18050
  2. 0:05 — The printer and its external ink tank
  3. 0:11 — Ink lines to the custom tank

PE and PW

Two sensors inside every Epson desktop printer. PE is paper end: it tells the board whether paper is present. PW is paper width: it reads the edge. On transparent PET film both misread, so a stock printer either refuses the film or stops mid-roll. The old fix was tape over the sensor. It works until it does not: the printer still thinks it sees a sheet, so it ejects the roll at the end of every page and slows down as it goes.

Comparison card: taping the paper sensor versus the PE PW bypass module on the Epson L18050
Why we stopped taping sensors.
Long roll of white-ink DTF sticker transfers coming out of a converted Epson L18050 onto the floor
A continuous roll of transfers; the printer never ejects.

Bypass instead

Our module replaces the sensor signals so the board is satisfied from the first millimetre to the last, no tape, no page breaks, and the IVFO part of the same board keeps the speed constant. That is what the clip is showing: the roll keeps coming without the printer pausing. The module is sold on its own for people converting their own printer: PE/PW bypass module, and the no-tape live demo is here.

Epson L18050 ink tank side with the external DTF ink tank connected
The custom external ink tank feeding the printer.

The printer

This conversion is sold today as the L18050 DTF roll printer at ₹92,300 + GST: PE/PW bypass, IVFO, custom RIP, roll functionality, external tank, tested before dispatch, with installation pan India. The same build works on the L8050.

Ink lines running from the L18050 to the external colour and white DTF ink tank on the floor
Ink lines to the floor tank: CMYK and white.

Frequently asked questions

What are PE and PW sensors?

Paper end and paper width. They misread transparent film, so a stock printer refuses or ejects it.

Why not just tape the sensor?

Tape makes the printer think it sees a sheet: it ejects at every page end and slows down. The bypass keeps a continuous roll at full speed.

Is the module sold separately?

Yes, for people converting their own L18050 or L8050.

Does the converted printer come installed?

Yes, with on-site installation and training pan India.

Related guides

Converting your own L18050?

Message on WhatsApp and I will tell you whether you need the module, IVFO, or both.

WhatsApp +91 86555 56060