The DTF Mini Oven, 14 × 22 Inch, Made in India: 30 mm Insulation, Auto Cut-Off, and Fifteen-Second Curing

Published 26 October 2022

The oven we had been importing was thin-walled and ate electricity, so we built one. This is the 2022 version: 14 × 22 inch outside, a 13 × 19 inch tray, 30 mm of insulation, a red light that tells you it is at temperature and a thermostat that switches the element off there. Made by Summit Industries, one of our companies, with six months warranty. Ninety seconds, and one opinion: cure for fifteen seconds, not six.

Clip, 1 min 27 s. October 2022. · Watch on YouTube

What the video shows

  1. 0:01 — New model: 13 × 19 inch tray, heavy duty
  2. 0:20 — 30 mm insulation: lower power consumption
  3. 0:37 — Red indicator; switches off at set temperature
  4. 0:50 — Made by Summit Industries, one of our companies
  5. 1:05 — The finest oven in the market, we say
  6. 1:12 — DTF is proper curing: fifteen seconds, not six

Built heavy, insulated thick

Thirty millimetres of heat sealant in the walls. That is what keeps the heat inside the box instead of in the room, which is why this oven uses less power over a year than the thin imported boxes it replaced. The tray is 13 × 19 inches: an A3 sheet with room to spare.

Spec card: Indian-made 14x22 inch DTF mini oven
Built to hold heat, not share it.
Blue DTF mini oven on a workshop bench with a green indicator light, caption oven by Creative
The oven on the bench.
Hand pulling the sheet tray out of the blue DTF oven
The 13 × 19 inch tray.

Set and forget

Set the temperature on the dial. The red indicator comes on while heating; at temperature the element switches off automatically and cycles to hold. You are not watching a thermometer.

Hand on the temperature dial of the DTF oven with the red and green indicator lights
Dial, red for heating, auto cut-off at temperature.
Summit Industries nameplate on the side of the blue DTF oven
Made by Summit Industries, our own factory.

Fifteen seconds

You can cure a sheet in six or seven seconds in this oven. We cure for fifteen. DTF is all about proper curing: under-cured powder peels and over-cured powder dulls colour, and fifteen seconds at the right temperature is the window that gives a full, even melt edge to centre. The oven is why we stopped calling the heat press an alternative; see the Bangalore demo.

Hand on the closed lid of the blue DTF oven
Lid down, sheet curing.

Today

The current version is the A3 DTF oven 14 × 22, same build, same insulation. Powder to go with it: 100 percent TPU; curing and colour are covered in colour calibration.

Frequently asked questions

What size sheet fits the DTF mini oven?

A 13 × 19 inch tray: A3 with room to spare.

Why 30 mm insulation?

Heat stays in the box, so the oven uses less power over the year than thin imported ovens.

How long to cure a DTF sheet?

Fifteen seconds at the set temperature. Six or seven works, but fifteen gives an even melt edge to centre.

What is the warranty?

Six months, made by Summit Industries in India.

Related guides

Need an oven?

WhatsApp your sheet size; the A3 oven ships pan India.

WhatsApp +91 86555 56060

More videos: DTF inks, film and powder