Gold and Silver Glitter DTF on the L18050: Print the Adhesive Where You Want Glitter, Press, Peel. No Vinyl Cutting
Published 20 August 2023
Glitter on a tee used to mean a vinyl cutter, a plotter blade, weeding every letter by hand. This video shows the other way: a gold glitter DTF sheet goes through the converted L18050 like any film, the printer lays the design down as the adhesive layer, you powder, cure, press and peel, and the glitter stays only on the design. The cutter in the first frame is there to show what you no longer need. There is no voice on this upload, so the steps are written from the footage.
What the video shows
- 0:24 — The vinyl cutter: the old way
- 1:14 — Gold glitter DTF sheets on the L18050 tray
- 2:03 — Printing the design onto the glitter sheet
- 3:42 — The printed glitter sheet: sun shapes as adhesive
- 5:20 — Powder and cure
- 6:10 — Peel the carrier; cut to size
- 7:48 — Position on the tee
- 8:38 — Press
- 9:27 — Result: gold glitter designs on a black tee
The old way, in one frame
A plotter cuts glitter vinyl, you weed the waste by hand, press, peel. Fine for one big logo; slow and wasteful for a sheet of small designs, and every intricate letter is a fight. The red cutter at the start of the video is the machine this method retires for glitter work.


Print the design onto the glitter sheet
Gold or silver glitter DTF film goes into the L18050 as a sheet, glitter side up. The design prints onto it: the printed areas become the adhesive layer, with white and colour if the design has them. Everything not printed stays bare glitter, which will not transfer.



Powder, cure, cut, press
Powder and cure the printed sheet the same way as a normal transfer; the powder sticks only to the printed areas. Cut the sheet to size, place on the garment, press, let it cool, peel. The glitter lifts where the adhesive was printed and the rest comes away with the carrier.



Result and limits
Gold designs on a black tee with crisp edges, no weeding. The limits: the glitter is one colour per sheet, so a gold design is all gold; fine detail works because the printer defines it, not a blade; and the film is thicker than standard PET, so feed sheets, not rolls, and keep the printer and tray level. Film: golden glitter DTF film; printer: converted L18050. For foil instead of glitter see DTF foil stamping.

Frequently asked questions
How does glitter DTF work?
The design prints as the adhesive layer onto a glitter DTF sheet. After powder, cure and press, glitter transfers only where the design was printed.
Do I need a vinyl cutter?
No. The printer defines the design; there is nothing to cut or weed.
Can I print rolls of glitter film?
Feed sheets. Glitter film is thicker than PET and feeds best flat from the tray.
Can a design have more than one glitter colour?
One glitter colour per sheet. Print separate sheets for gold and silver.
Related guides
Want glitter samples?
Send a logo on WhatsApp and we will print it on gold glitter through the service first.
WhatsApp +91 86555 56060More videos: DTF inks, film and powder
- Colours Coming Too Dark or Too Light on DTF? Ink Percentage, White Percentage, Curing and Film, Tested Live
- Fluorescent DTF: Fill the CMYK Tanks With Fluorescent Ink, Design in Pure Channels, and Watch It Glow Under UV
- How Cheap Ink Quietly Kills a DTF Printer, and Why We Sell XDTF Premium Instead
- Top-Quality DTF Inks, Proven on a Two-Year-Old Head: Anti-Clogging Agents, High Brightness, Low Moisture, Trial Pack
- The DTF Mini Oven, 14 × 22 Inch, Made in India: 30 mm Insulation, Auto Cut-Off, and Fifteen-Second Curing