Top-Quality DTF Inks, Proven on a Two-Year-Old Head: Anti-Clogging Agents, High Brightness, Low Moisture, Trial Pack

Published 30 April 2024

The strongest argument for an ink is a nozzle check on an old head. This clip opens with one on a print head that had run two years on our inks, every channel clean, then shows the roll it was printing. The captions say what is in the bottle: anti-clogging agents, high brightness, low moisture. Low moisture is the one people do not think about; it is why prints do not get that watery dotted look and why heads last. A minute, with a trial pack at the end.

Clip, 61 s. April 2024. · Watch on YouTube

What the video shows

  1. 0:02 — Anti-clogging agents; high brightness; low moisture content
  2. 0:07 — Nozzle test on a two-year-old print head
  3. 0:17 — New stock arrived, 100 percent tested
  4. 0:27 — High colour consistency, as bright as RGB
  5. 0:43 — No more frequent head cleaning; save ink, save the head
  6. 0:53 — Get a trial pack of CMYKW

The nozzle test

A print head that has run two years of DTF and still prints a clean nozzle pattern is the only ink review that matters. The pattern in the clip is on a production printer on our floor, not a demo unit. Clean channels mean the pigment is dispersed properly and nothing has dried in the nozzles between jobs.

Card: properties of top quality DTF inks shown in the 2024 nozzle test clip
A nozzle check on an old head is the proof.
Nozzle test pattern printing on a DTF printer with the caption nozzle test on a 2 years old print head
Nozzle check on a two-year-old head.
Clean nozzle test pattern on film with every channel printing, caption new stock arrived 100 percent tested
Every channel clean.

What is in the bottle

Anti-clogging agents keep the ink wet at the nozzle during idle time. High brightness means more pigment per drop, so colours sit bright on the white base and the white itself is opaque. Low moisture content is the one that shows on the film: ink that carries excess water leaves dotted, watery edges on the print and feeds moisture into the head. Ours is formulated to carry less, which is also why it needs no circulation on a daily-use printer.

Printed DTF roll with silver-grey circular designs and the caption high colour consistency as bright as RGB
Colour consistency on the roll.
DTF printer carriage passing over the film roll during printing
Printing from the roll.

Fewer cleans, longer head

Every head clean pulls ink into the waste bottle and stresses the head. Ink that does not clog needs fewer cleans, so you save ink twice: the ink you did not waste and the ink you did not have to buy for a replacement head. The capping stations in the clip are on printers running this ink daily.

Two capping units on the bench with the caption no more frequent head cleaning, save ink, save print head
Fewer cleans: the capping units stay wet, the heads stay open.
Printed red design on DTF film with the caption get a trial pack of CMYKW
Red at full strength; trial pack available.

Try before switching

The 100 g × 5 CMYKW trial pack is for exactly that. Full sizes: premium white and the 1 kg CMYKW set. If you are moving from another ink, flush first; the method is in manual head cleaning, and the case against cheap ink is here.

Frequently asked questions

What makes a DTF ink anti-clogging?

Agents that keep the ink wet at the nozzle during idle time, plus proper pigment dispersion so nothing settles in the lines.

Why does low moisture matter?

Excess water in ink leaves dotted, watery edges on prints and carries moisture into the head. Low-moisture ink prints cleaner and needs fewer cleans.

Do I need ink circulation with these inks?

Not on a printer used daily. They are low-sediment.

Can I test before switching?

Yes. The 100 g × 5 CMYKW trial pack.

Related guides

Want the trial pack?

WhatsApp 'trial pack' with your printer model.

WhatsApp +91 86555 56060

More videos: DTF inks, film and powder