Audley vs the Other 12-Inch DTF Printers: Roll Feeder, Capping Unit, Anti-Collision Sensors, Heating Blade, and Free Training

Published 4 April 2023

Three 12-inch DTF printers on one floor in April 2023: an Audley unboxed two days earlier, an AP400, and the mini 12-inch. Everyone asks why I keep pointing people to the Audley when it costs more, so I walked between them and showed the differences one by one: feeder, capping unit, sensors, tanks, and a shaker with a heating blade. All machines we run ourselves, not just resell. And the offer at the end still stands: come to the unit, learn for free.

Floor tour, 6 min 19 s. April 2023. · Watch on YouTube

What the video shows

  1. 0:01 — Audley, AP400 and the mini 12-inch on one floor
  2. 0:39 — Why the Audley: roll feeder, capping unit, sensors
  3. 0:52 — No anti-collision sensors on the AP400
  4. 1:12 — Hassle-free printing costs a little more: ink quality and density
  5. 1:27 — Capping unit motors; the heating blade on the shaker
  6. 2:18 — Sensors left and right of the head, shown paused
  7. 2:42 — Heavy duty; 1 to 1.5 kg tanks; no roll feeding errors
  8. 2:54 — PC and UPS included
  9. 3:23 — The mini 12-inch: good, no sensors, for the experienced
  10. 3:42 — Heating blade: removes moisture before feeding
  11. 3:55 — We use what we sell; demos at the unit
  12. 4:25 — Indian-made heat press, six months warranty
  13. 5:00 — L1800 for startups
  14. 5:41 — Free demo and five days of training at Vashi, Navi Mumbai

Three machines

The Audley, new in the box two days before, a 12-inch roll-to-roll with dual heads. The AP400, a 12-inch we also trade in. And the mini 12-inch, the budget option. All three print DTF well. The differences are in what happens when something goes slightly wrong.

Comparison card: Audley versus AP400 and mini 12-inch DTF printers from the 2023 floor tour
What the extra money buys.
Brand-new Audley 12-inch DTF printer on the workshop floor with its cover, caption 12 inch DTF high speed DTF
The Audley, unboxed two days earlier.
AP400 12-inch DTF printer on the floor with its control panel and emergency stop
The AP400 beside it.

Feeder, capping, sensors

The Audley's roll feeder does not let you misfeed; the film goes in straight or not at all. Its capping unit uses different, stronger motors, which is what keeps a head alive between jobs. And it has anti-collision sensors on both sides of the head: if lifted film touches one, the carriage stops instantly. The AP400 does not have them; neither does the mini. On a dual-head machine that sensor is the difference between a scratch and two new heads.

Audley 12-inch printer printing white-ink transfers with the carriage visible
The Audley printing; sensors sit either side of the carriage.
Hand pointing at the anti-collision sensor beside the Audley print head over a colourful print
The anti-collision sensor, with the print paused to show it.

Shaker with a heating blade

The Audley's powder shaker has a heating blade at the entry. Film carries moisture, and powder sticks to moisture as well as to ink, so you get grainy powder in the clear areas. The blade heats the film as it feeds in and removes the moisture before powdering. Most shakers do not have it. Also included with the Audley: a PC and a UPS, so there is nothing to buy separately.

Powder shaker unit with the heating blade at the film entry on the Audley line
The shaker entry with its heating blade.
Printed DTF transfers exiting the Audley printer onto the table
Transfers exiting the Audley; no feeding errors.

Press and startups

Beside the printers: our own heat press, 100 percent Indian-made, heavy built, six months warranty, next to the Chinese one so you can see the difference. And for startups the L1800 was still on offer then. Everything on this floor we run for our own production; we do not import and forward.

Indian-made heat press open on the workshop floor beside the DTF printers
The Indian-made press, built heavier than the import.

Free training

Whether you buy or not, the demo and the training are free at the unit in Navi Mumbai. Stay five days and learn everything; you arrange your own stay and food. That offer has not changed, and there is now a second unit in Hyderabad. The 12-inch line today is the Yinstar 12-inch, with the same sensors and heated feed, reviewed here. The press is here.

Frequently asked questions

Why does the Audley cost more than other 12-inch DTF printers?

Roll feeder that cannot misfeed, stronger capping motors, anti-collision sensors, a shaker with a heating blade, and PC plus UPS included.

What does the heating blade do?

Removes moisture from the film before powdering, so powder sticks only to ink.

Is the mini 12-inch a bad printer?

No. Good for experienced operators; it lacks the sensors.

Do you offer training?

Yes, free demo and up to five days of training at the Navi Mumbai unit, buy or not.

Related guides

Want the free demo?

WhatsApp a date. Navi Mumbai or Hyderabad, buy or not.

WhatsApp +91 86555 56060

More videos: Dedicated DTF printers (X-ARC, Yinstar)