Everything About the DTF PET Film Printer in 2021: Sheet-Fed, Roll-Fed L805 and L1800, Heat Press and Oven at the Ahmedabad Expo

Published 24 August 2021

August 2021, Print Innovation Expo in Ahmedabad, and the banner on the stall said everything about the DTF PET film printer, 2021: sheet fed, roll fed L805 and L1800, heat press, oven. That was the whole updated setup at the time, and the rule written under it, questions welcome no matter where you bought, is still how the stall works. This video has no captions and YouTube blocks the download, so the pictures here are the video's own stills; the post is what the stall showed.

Expo stall, 10 min 17 s. Ahmedabad, August 2021. · Watch on YouTube

What the video shows

  1. 0:00 — The banner: everything about the DTF PET film printer, 2021
  2. 2:34 — Printed tees on the stall and the roll printer behind
  3. 5:08 — Powder shaken in a tray
  4. 7:42 — Cartoon transfers on the table

The four things on the banner

Sheet fed: a converted Epson printing A3 sheets, the entry point. Roll fed: the L805 and L1800 with the roll module and the first ZigRoll, printing continuous rolls of transfers. Heat press: for pressing. Oven: for curing. In 2021 that was the complete updated setup, and the point of the banner was multicolour on any fabric type or colour from one process.

Card: the DTF setup shown at the 2021 Ahmedabad Print Innovation expo
What the banner promised.
Expo banner reading multicolor printing on any type or colour fabric, everything about DTF PET film printer 2021, with sheet fed, roll fed 805 1800, heat press and oven curing machine illustrated
The banner: sheet fed, roll fed, press, oven.
Stall table at the Ahmedabad expo with printed t-shirts, the roll-fed Epson and a curing oven, caption updated DTF setup roll and sheet
The stall: tees, roll printer, oven.

Powder in a tray

No shaker on the stall; a printed sheet goes into a red tray of hot-melt powder, gets tipped and shaken by hand so powder sticks only to the wet ink, and goes to the oven. That is still how we powder sheets, and why we tell people the oven matters more than the shaker.

Printed DTF sheet being powdered by hand in a red tray at the expo stall
Powder in a tray, by hand.

The transfers

Cartoon sheets, an owl, Doraemon, the characters every stall visitor in 2021 asked for, printed on the L1800 and laid on the table for people to feel and peel. Samples like these are what sold the process; nobody bought a printer from a brochure.

Cartoon DTF transfers including an owl and Doraemon laid out on the expo table
Transfers on the table for visitors to handle.

Where this went

The L805 and L1800 are discontinued; the small printer is now the converted L18050. The roll software became ZiggRoll V4. The press and oven are here and here. The same questions from the same year, answered on camera, are in the 2021 startup FAQ, and the 2022 Bangalore stall is here. Questions are still welcome whether you bought from us or not; that line never left the stall.

Frequently asked questions

What was the DTF setup in 2021?

A sheet-fed converted Epson, roll-fed L805 and L1800 with roll software, a heat press and a curing oven.

How was powder applied without a shaker?

By hand in a tray: tip, shake, tip back, then into the oven.

Is the 2021 setup still sold?

The process is the same; the printer is now the converted L18050 and the software is ZiggRoll V4.

Related guides

Have a question, bought from us or not?

WhatsApp it. Same rule as the stall.

WhatsApp +91 86555 56060

More videos: Starting and running a DTF business