X-Arc UV 2030, Three in One: Do Not Just Buy a UV DTF Printer When Flat UV Is Ten Times Cheaper Per Print

Published 2 September 2025

The caption at the start says it: do not just buy a UV DTF printer. UV DTF is a sticker, and a sticker costs film, glue layer, lamination and your time. If the object is flat, put it on the bed and print on it, roughly ten times cheaper per piece. The X-Arc UV 2030 at the expo does that, and UV DTF, and bottles on the rotary. Sixty-one seconds, captions only, and the argument for buying the hybrid instead of the single-mode machine.

Expo clip, 61 s. September 2025. · Watch on YouTube

What the video shows

  1. 0:02 — Not just UV: flatbed, roll to roll and rotary attachments
  2. 0:07 — X-Arc UV 2030, 3 in 1
  3. 0:12 — UV DTF, flat UV, round UV
  4. 0:17 — Flat products: metal, acrylic, plastic, leather, PVC, any hard surface
  5. 0:22 — Ten times cheaper than UV DTF
  6. 0:33 — Any flat object printed directly: the notebook
  7. 0:43 — Training: connect for hands-on
  8. 0:53 — Marketing, designing, production, operation, setup
  9. 0:58 — CGI Print Master training on YouTube

Three modes

Roll-to-roll for UV DTF stickers. A flatbed for anything flat and hard: metal, acrylic, plastic, leather, PVC. A rotary for bottles and round objects. All three attachments come with the 2030; swap between them in minutes.

Comparison card: UV DTF stickers versus direct flatbed UV printing cost
Use the sticker only where the bed cannot go.
Poster: not just UV, X-Arc UV printer with flatbed, roll to roll and rotary attachment, do not just buy a UV DTF printer
The poster at the stall: not just UV DTF.
X-Arc UV 2030 at the expo with the roll attachment fitted, caption 3 in 1
The 2030 with the roll fitted.

Ten times cheaper

A UV DTF sticker for a notebook cover costs film, the glue layer, lamination film and the minutes to apply it. The same notebook on the flatbed costs ink and thirty seconds. For flat objects that is about a tenth of the cost per piece, which is why the single-mode UV DTF printers people buy first end up printing stickers for jobs that should have been direct.

Flatbed of the X-Arc UV 2030 printing a cartoon design directly onto a green notebook cover
A notebook printed directly on the flatbed.
Green notebook with a full-colour cartoon UV print, caption any flat object can be printed directly
The finished notebook: no sticker, no lamination.

Training

The machine comes with on-site setup, and beyond that we run training across marketing, designing, production and operation, with the CGI Print Master series on YouTube for the long version. The expo clip ends on the rotary printing a bottle under the lamp.

Rotary attachment of the X-Arc UV 2030 printing a bottle under the UV lamp, caption marketing designing production operation setup
Rotary mode at the stall.

The machine

The 2030 is the compact X-Arc hybrid: X-Arc hybrid UV, walked through in this post; the three-head 60 × 90 version is the Yinstar 6090. UV DTF as a service: here.

Frequently asked questions

Why not just buy a UV DTF printer?

Because flat objects print directly on a flatbed at about a tenth of the per-piece cost of a sticker. The hybrid does both.

What surfaces print on the flatbed?

Metal, acrylic, plastic, leather, PVC, any hard flat surface.

Does it do bottles?

Yes, with the rotary attachment included.

Is training included?

On-site setup, plus training across design, production and operation.

Flat objects to print?

WhatsApp a photo of the item; we will print one on the flatbed and send it back on video.

WhatsApp +91 86555 56060

More videos: UV and UV-DTF printing