Yinstar UV 6090, Three Heads, Three Jobs: Flatbed, UV DTF Roll to Roll and Rotary, Plus UV-on-Vinyl Transfers and ₹3 Silicone Labels

Published 3 October 2026

Sixty by ninety centimetres, three i3200 heads, and three attachments that make it three printers: a flatbed for objects, a roll-to-roll for UV DTF film, and a rotary for bottles. The part people had not seen before is in the middle of the clip: UV printed onto HD vinyl, plotter-cut, and heat-pressed onto a tee, and silicone labels that come out at about three rupees each. Two minutes, and the whole thing runs with two days of on-site training.

Walkthrough, 2 min 4 s. October 2026. · Watch on YouTube

What the video shows

  1. 0:00 — Yinstar UV 6090: 60 wide, 90 long; three attachments
  2. 0:22 — Direct object, or vinyl then plotter-cut and heat press
  3. 0:38 — Acrylic, sunboard; rotary too
  4. 0:55 — A UV-on-vinyl transfer pressed on a garment
  5. 1:08 — Laser HD vinyl with UV print on top
  6. 1:20 — Job work or printer: contact
  7. 1:31 — Silicone labels, about ₹3 each
  8. 1:48 — Three heads, laser micro-adjustment

Three attachments

Flatbed: 60 × 90 cm, put the object on the bed and print. Roll-to-roll: feed UV DTF film and print sticker transfers continuously. Rotary: bottles and flasks turn under the head. All three come with the printer; the laser does micro-adjustment of head height so a phone case and a wooden board are both printed at the right gap.

Spec card: Yinstar UV 6090 3-in-1 hybrid UV printer
Three printers, one frame.
Flatbed of the Yinstar UV 6090 with printed sticker sheets and the carriage above, caption UV DTF plus UV roll to roll on any media plus flatbed and rotary
The 60 × 90 bed with UV DTF sheets.
Yinstar UV 6090 printing on the flatbed with the three-head carriage
Three i3200 heads over the bed.

UV on vinyl, then press

Print the design in UV onto HD or laser vinyl on the flatbed, plotter-cut around it, weed, and heat-press onto the garment. The tee in the clip has a laser-marked vinyl with a full-colour UV print on top: a finish neither DTF nor plain vinyl gives alone. For garments it is a niche; for brands that want a metallic or holographic base under full colour it is the only way.

Hand holding a cut UV-printed vinyl transfer of a cartoon bear over a white t-shirt
UV printed on vinyl, cut and ready to press.
White t-shirt with a Snoopy design pressed from UV-printed laser vinyl
Pressed: laser vinyl base with UV colour on top.

Labels at ₹3

Silicone labels for garments and bags, printed on the flatbed in a die, come out at about three rupees a piece. We supply them as job work too; the next video shows how they are made. Acrylic, sunboard, any flat sheet: same bed.

Hand holding small printed silicone labels over a white t-shirt
Silicone labels: about ₹3 each.
Flatbed of the UV printer with small items loaded in a die for printing
Small items in a die on the bed.

The machine

The Yinstar 6090 is the bigger brother of the X-Arc hybrid UV; three i3200 heads for speed, the same three modes. Two days of hands-on training on site anywhere in India. The UV DTF stickers as a service are on the UV DTF page, and the X-Arc hybrid walkthrough is here.

Frequently asked questions

What is the Yinstar UV 6090?

A 60 × 90 cm hybrid UV printer with flatbed, roll-to-roll UV DTF and rotary attachments, three i3200 heads and laser height adjustment.

Can it print transfers for t-shirts?

Yes: UV onto HD or laser vinyl, plotter-cut, heat press. Full colour over a metallic or holographic base.

What are the ₹3 labels?

Silicone garment labels printed in a die on the flatbed. Available as job work.

Is training included?

Two days of on-site hands-on training, pan India.

Labels, stickers or a printer?

WhatsApp what you need. Job work ships; the printer comes with two days of training.

WhatsApp +91 86555 56060

More videos: UV and UV-DTF printing